Publicité
Les langues disponibles
Les langues disponibles
202107 Belt sander 900W
9. DRIVE BELT REPLACEMENT(See Fig. I. J)
WARNING! Remove the main plug from the socket
before carrying out a drive belt replacement. Remove the
screws (a) and the belt cover as shown. Carefully cut the
drive belt if not already broken and remove from your belt
sander. Fit your new drive belt around the large pulley.
Then install onto the small pulley by rotating clockwise
and pushing the drive belt shown around the small pulley
a
I
at the same time. The drive belt will be a tight fit. Fit the
5
belt cover and screws.
21
SAFETY AND OPERATING MANUAL
Publicité
