Publicité
Les langues disponibles
Les langues disponibles
Use of the power tool for operations different from those intended could result in a hazardous
situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Safety Warnings for belt sander:
Hold power tool by insulated gripping surfaces, because the belt may contact its own cord.
Cutting a "live" wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
5. OPERATING INSTRUCTIONS
Note: Before using the tool, read the instruction
book carefully.
Intended Use
The machine is intended for dry sanding–with high
removal capacity–of wood, plastic, metal, filler as well as
varnished surfaces.
1. ON/OFF SWITCH (See Fig. A)
Depress to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON (See Fig. B)
Depress on/off switch (8) then lock on button (3).
Your tool is now locked on for continuous use. To
switch off your tool just depress and release the on/
off switch.
3. ADJUSTING AUXILIARY HANDLE (SEE FIG C)
For your personal safety we recommend using the
auxiliary handle at all times.
To adjust the handle, Release the Auxiliary handle locking
knob and rotate the handle to the most comfortable
and balanced position. Then press the Auxiliary handle
locking knob
4. VARIABLE SPEED CONTROL DIAL (See Fig. D)
Adjust the variable speed control dial (2) to increase
or decrease the speed according to the material and
sanding belt specification to be used (also possible
during no load operation). See the table below for general
guidance on speed selection. Avoid prolonged use at
very low speed as this may damage your sander's motor.
202107 Belt sander 900W
19
SAFETY AND OPERATING MANUAL
A
B
3 8
H
Publicité
