Setting The Color Temperature - Sony Trinitron CPD-100ES Mode D'emploi

Setting the Color Temperature

The selected color temperature becomes the common setting
for all input signals.
1
Press the COLOR button.
The "COLOR TEMPERATURE" OSD appears.
COLOR
2
Adjust with the > ?// and ¨ >/. buttons.
To select 5000K or 9300K
Press the > ?// buttons.
The selected color temperature is indicated in yellow.
? . . . to select 5000K
/ . . . to select 9300K
To obtain the desired color temperature between
5000K and 9300K
Press the ¨ >/. buttons.
> . . . for higher temperature
. . . . for lower temperature
Your most recent adjusted color temperature will be
recalled by pressing the ¨ >/. button.
To erase the "COLOR TEMPERATURE" OSD, press the
COLOR button again.
The "COLOR TEMPERATURE" OSD automatically
disappears 10 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
COLOR TEMPERATURE
VAR I ABLE
5000K 9300K
5 0
Resetting the Adjustment
Data to Factory-preset Levels
To reset an adjustment item
Press the button of the adjustment item you want to reset,
and then press the RESET button before the OSD (On
Screen Display) disappears.
To reset all adjustment data at once (for
the received signal)
Press the RESET button when no OSD is shown.
RESET
To reset all adjustment data to factory-
preset levels
Press and hold the RESET button for more than 2 seconds.
All adjustment data are reset to factory-preset levels.
RESET
Note
If you have difficulties pressing the reset button, please use a
pointed object (e.g. a pen).
EN
7