Publicité
Les langues disponibles
Les langues disponibles
6
Attach the extractor hood.
Adjust the height and align horizontally with the
adjusting screws.
Check that the 4 lower fixing holes have
been correctly marked. If required, mark again.
7
Remove the extractor hood. Drill the 4 lower
5
/
" ø fixing holes and press in the wall plugs
16
flush with the wall.
5
10
/
8
5
15
/
''
8
11
3
/
''
16
5
6
/
16
30''
18
''
''
8
Attach the extractor hood and screw into
position with the remaining 4 screws.
9
Stick protective film over the holes of the 2
lower mounting bolts in the protective grid.
10 Connect up the air outlet pipe.
11 Connect the hood to the electricity supply.
Publicité
