IKEA SOLSTOL Mode D'emploi page 5

Instructions for using other Type-A key tags compliant
with ISO/IEC 14443
• Other Type-A key tags compliant with ISO/IEC 14443 (for ex. library
card, membership card and public transport card) can be used as a
key tag for SOLSTOL lock. You can pair up to 10 key tags at the time
with one lock.
• To add a new key tag, press and hold the button for 2 seconds until
a sound signal can be heard. Hold the new key tag close to the
reader. The lock will emit a confirmation sound when the new key
tag is paired.
• To remove the pairing of key tags, reset the lock.
WARNING
• Discard the product if damaged.
• Use only indoors.
• Never submerge in water or other liquids.
• Children should be supervised to ensure they do not play with the
product.
• Do not use batteries which are low in charge or empty.
• Always insert the batteries into the charging slots according to the
polarity indications (+/-).
• Risk of explosion if either battery is replaced by an incorrect type.
• Do not mix batteries of different capacities, types or date stamps.
• Batteries should be handed in for recycling in accordance with local
environmental regulations for waste disposal.
Care instructions
To clean the product, wipe with a dry cloth.
Good to know
• The lock works for approx. 24 months without changing the
batteries. This applies when using 2 x LADDA AA HR6 2450 mAh
batteries and when the lock is opened/closed 3 times per day.
• Operating temperature: 0 °C to 40 °C (32 °F to 104 °F).
Recommended battery types
LADDA AA HR6 rechargeable batteries.
Technical data:
Model: SOLSTOL
Type: E2135
Input: 2 x AA/HR6
Operating frequency: 13.56 MHz
Output power: -26.08 dBμA at 10m
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
5