Continental CDVS500-1NEA Manuel D'installation Et D'opération page 31

5.3 logo placement
Remove the backing of the logo supplied and centre over the logo installation holes, as indicated.
5.4 trivet installation
Insert the trivet into the space on the appliance top. Line
up the holes in the brackets, and secure using the screw
provided.
5.5 control access cover removal / installation
Lift the control access cover up then away from
the appliance to remove. Reverse instructions
to install control access cover.
finishing
EN
BRACKET
31
W415-4082 / B-0 / 08.27.24