Publicité
Les langues disponibles
Les langues disponibles
UNDERSTANDING YOUR TRAINING
SYSTEM
1. Turning the System On/Off
Magnetic
Red Dot
To turn on the STB BEEPER COLLAR or STB HAWK
COLLAR, place the activation magnet on the magnetic red
dot on the system. Hold them together for a moment until
the LED light comes on. The system will play a melody
and then beep twice when it is turned on.
To turn off the STB BEEPER COLLAR or STB HAWK
COLLAR, place the activation magnet on the magnetic red
dot on the system. Hold them together until the LED light
turns red. The system will play a melody when it is turned
off.
8
2. Beeper Function
The STB BEEPER COLLAR will always start in the Run/
Point Mode. To change to the Point-Only Mode, turn the
system on and place the activation magnet to the red dot
on the STB BEEPER COLLAR for 1 second and release.
When the Point-Only Mode is selected, the STB BEEPER
COLLAR will emit a beep sound. If you want to change to
the Run/Point Mode again, repeat the same procedure by
turning the system on and placing the activation magnet
to the red dot on the STB BEEPER COLLAR for 1 second
and release.
In the Run/Point Mode, there will be a double beep every
7 seconds while the dog is running and double beep every
2 seconds when the dog is pointing/stationary.
In the Point-Only Mode, the beeper will remain silent while
the dog is running and double beep every 2 seconds when
the dog is pointing/stationary.
Mode
Dog Running
Double beep
Run/Point Mode
every 7 seconds
Point-Only Mode
No Sound
Dog Pointing
Double beep every 2 seconds
Double beep every 2 seconds
9
Publicité
