Pull the lever for recline and set the seat un required position as follows (see Figure I for reference):
•
Rearfacing seat: Five possible recline positions for the seat as shown in Figure I.1.
•
Forward-facing seat: Five possible recline positions as shown in Figure I.2.
Installation with ISOFIX and top tether (rearward facing).
Use the chair's 5-point safety harness to ensure your child's safety.
1. Install ISOFIX attachment.
2.Place the car seat tightly on the car seat in rearward facing position, fix the top tether.
3.Place the child in car seat, put and lock the 5-point safety harness.
Installation with ISOFIX and top tether (forward facing).
Use the chair's 5-point safety harness to ensure your child's safety.
1. Install ISOFIX attachment.
2.Place the car seat tightly on the car seat in forward facing position, fix the top tether.
3.Place the child in car seat, put and lock the 5-point safety harness.
Installation with ISOFIX and 3-point safety belt (forward facing) – figure L.1
1.Install ISOFIX attachments to ISOFIX slots at vehicle.
2.Place the child in the car seat and set the height of head support based on the child's height.
3.Pull the 3-point safety belt of vehicle.
4.Thread the diagonal belt though the guide of head support, and the lap through the guide of base and lock them
into the vehicle buckle.
Installation only with 3-point safety belt (forward facing) – figure L.2
1.Place the child in the car seat and set the height of head support based on the child's height.
2.Pull the 3-point safety belt of vehicle.
3.Thread the diagonal belt though the guide of head support, and the lap through the guide of base and lock them
into the vehicle buckle.
❖ MAINTENANCE
1. Regularly check the locking, fixing and adjusting mechanisms, the belts and cover, in order to make sure that they are in
good working order, not worn or damaged and their use is safe.
2. If you find any fault or that any of the functions does not work, stop using he car seat.
3. The car seat must not be used without cover! It is integral part of the car seat and can be replaced only with an identical
one to the one provided by the manufacturer.
4. Do not use the car seat after an accident because it can have undergone structural changes which can make it very
dangerous. It is possible to have damage which are not visible. The inspection of a repair shop specialist is obligatory.
5. Do not expose the car seat to the harmful effect of direct sunlight, because this will lead to faster and untimely aging of
the plastic parts and fading of the cover.
6. Store the car seat at a place to which small children do not have access. Do not store it at a wet and dusty room with very
low or very high room temperature. Do not place other objects on the car seat while you store it, because this may lead to
damage of the product.
7. Check regularly the main parts before each use of the car seat.
8. If any technical problem occurs related with the normal use of the car seat, do not try to repair the product by yourselves.
Contact the shop, from which you bought It or authorized service center.
CHILD SEAT INSTALLATION IN REARWARD FACING POSITION - FIGURE J
Using: ISOFIX + Top tether + 5-point safety harness
CHILD SEAT INSTALLATION IN FORWARD FACING POSITION - FIGURE K
Using: ISOFIX + Top tether + 5-point safety harness
CHILD SEAT INSTALLATION IN FORWARD FACING POSITION - FIGURE L
CHILD'S HEIGHT: 100-150 cm
Using: ISOFIX + 3-point safety belt of the car
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
CHILD'S HEIGHT: 40-105 cm
CHILD'S HEIGHT: 76-105 cm
24