Télécharger Imprimer la page

Hoover SteamVac F5914 Manuel Du Propriétaire page 8

Publicité

Les langues disponibles

Les langues disponibles

2-5
E
Automatic "shut off"
When the recovery tank (lower tank) is full
the automatic shutoff mechanism will shut
off the carpet cleaner suction (suction will
be noticeably reduced).
At that time the yellow float disk will rise
to the top of the recovery tank lid (E).
The carpet cleaner will no longer pick
up dirty solution and the motor sound
will become noticeably higher in
pitch.
When this happens turn carpet clean-
er off and empty recovery tank before
continuing use.
Check clean solution tank also; it may
need to be refilled.
2-8
H
To clean screen (H), turn carpet cleaner
off and disconnect from electrical outlet.
Remove clear cover and wipe off screen
with a damp cloth. Snap cover back into
position.
8
All manuals and user guides at all-guides.com
2-6
Brush speed selector
Your SteamVac™ carpet cleaner has
three agitator brush settings.
Hl - for normal cleaning of carpet and
bare floors
LO - for gentle cleaning of carpets and
bare floors
OFF - for cleaning carpets and bare
floors when brushing is not desired.
(Such as when picking up liquid spills.
See page 11.)
Slide selector button to the desired set-
ting before cleaning.
2-9
The tanks
Clean solution tank
(upper tank)
The clean solution tank holds the clean-
ing solution that is to be dispersed onto
the surface to be cleaned.
How to fill
Disconnect carpet cleaner from
electrical outlet.
Place carpet cleaner handle in the
upright, locked position.
To remove tank, press down on handle
and pull forward.
Carry tank to a sink.
2-7
F
G
Brush indicator
The brush indicator will spin (F) when
the carpet cleaner is turned ON and the
brushes are rotating.
If the indicator does not spin and the
pattern is visible (G) when the carpet
cleaner is turned ON, the brushes are
not rotating.
There are three reasons why the brushes
may not be rotating:
1. Brush speed selector set on OFF (see
previous section).
2. Solution tube connected (Fig. 3-12).
3. Brush indicator screen dirty.
2-10
Rotate tank cap counterclockwise and
lift up to remove cap.

Publicité

loading