Publicité
Les langues disponibles
Les langues disponibles
OPERATION
EN
BEFORE FIRST TIME USE
Clean the unit and parts thoroughly before you use the unit for the first time (See
cleaning instructions)
USING THE APPLIANCE
• There is a jug sensor on the blender base. When blender jug is placed on the
unit, all the functions and time controls can be selected.
• Make sure the indicator is set to 0 when you start the blender.
• Put the desired ingredients into the jug.
• Mount the lid onto the jug and insert the lid cap or tamper.
• Select the desired pre-set by turning the wheel anti-clockwise and press the
start button in the middle of the display. The product will run the selected
program automatically, after program is completed, the blender will enter
standby mode.
• Select speed manually by turning the knob clockwise.
• Start / Pause button: Press the start / pause button to start the selected pre-
set, or to pause the operation while the motor is running.
• Manual Pulse: Press and hold pulse if you want to use the pulse function. The
motor will increase to full speed in pulse mode. Motor will stop when user
release the finger. After releasing, the product will return to standby mode.
The 3 preset programs:
Function
Hot soup
Auto clean
Smoothie
USING THE TAMPER
The tamper is to be used for stirring food. Never use the tamper without the lid
in place. Remove the filler cap from the lid and slide tamper into the jug.
The tamper has a splash guard located near the top that prevents the tamper
from coming in contact with the blade assembly.
CLEANING
Always clean the removable parts immediately after use.
• Disconnect the power from main supply.
INSTRUCTION MANUAL · POWER BLENDER
10
Operation Cycle
10:00 minutes
50 seconds
2:24 minutes
Publicité
