Publicité
Les langues disponibles
Les langues disponibles
Assemble the decoration strip. First, attach the decoration strip. Then fix it with six cross recessed pan head
13
screws.
14
Attach the side board covers. There are two pillars on the side board and two pillars on the side board cover. Move
the side board cover close to the side board and align the snap joints. Pinch the lower side board to connect. Then
knock the edge of the side board cover to make all the snap joints are clamped.
Attach the speaker covers. These are also attached by snap joints. Attach the side covers first, then the decoration
15
strip on the top.
Publicité
