Publicité
Les langues disponibles
Les langues disponibles
Installation
7
Access Panel
Make all connections before installing access panel.
Install access panel brackets
to wall using #10 fasteners
A
(supplied by installer) as
shown in rough in drawing.
Install top screw into slot. Do
not install bottom screw until
Step C is complete.
Insert #10 thumbscrews
into front bowl apron as
B
shown. Thumbscrew in
vertical position is closed.
Thumbscrew in horizontal
position is open.
Hang access panel onto
mounting brackets attached
to wall on the left and right
sides. Rotate panel up
C
and check fitup between
thumbscrews and panel slots.
Rotate access panel down
and make adjustment to
brackets if necessary. Install
bottom #10 fastener into
brackets.
D
Attach P-trap to drain adapter
and waste outlet.
Rotate access panel up
E
and secure by rotating
thumbscrews to the closed
position.
To open access panel, rotate
F
thumb screw, slightly push
panel up and swing access
panel down. Do not remove
thumbscrews.
Bradley • 215-1850 Rev. E: ECO 20-08-028B
CAUTION For applications where children are present or for applications
subject to vandalism, order security screw option S45-2880.
#10
Thumb
Screw
#10 Top
Screw
Shown in closed
position. Rotate
90° to Open
1/21/2021
LVAD2
11
Publicité
