Publicité
Chapter 14
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Enter the information:
1 ) Choose
Ping
•
Ping
is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
•
Traceroute
is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
2 ) Enter the
IP Address
3 ) Modify the
Ping Count
keep the default value.
4 ) If you have chosen Traceroute, you can modify the
recommended to keep the default value.
4. Click
START
to begin the diagnostics.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Ping.
System
> Diagnostics.
or
Traceroute
as the diagnostic tool to test the connectivity;
or
Domain Name
number and the
of the tested host.
Ping Packet
Size. It's recommended to
Traceroute Max
Manage the Router
TTL. It's
88
Publicité
