Publicité
Chapter 14
1. Tick the
Enable
checkbox of
2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value
between 1024 and 65535.
3. Select
Specified Device
4. In the
Only this IP Address
the router.
5. Click SAVE.
Devices using this WAN IP can manage the router by logging in to
IP:port number
(such as http://113.116.60.229:1024).
Tips: The router's WAN IP is usually a dynamic IP. Please refer to
to log in to the router through a domain name.
14 7
System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
•
To save the system log locally:
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
2. Go to
Advanced
>
3. Choose the type and level of the system logs as needed.
Remote
Management.
for
Remote
Managers.
field, enter the IP address of the remote device to manage
System
>
System
Log.
http://Router's WAN
Set Up a Dynamic DNS Service Account
Manage the Router
if you want
85
Publicité
