Publicité
Chapter 13
2 ) Click SAVE.
3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can
connect your set-top box to any of the router's Ethernet port.
If IGMP is not the technology your ISP applies to provide IPTV service:
1 ) Tick
Enable
IPTV/VLAN.
2 ) Select the appropriate
• Select
Bridge
• Select
Custom
3 ) After you have selected a mode, the necessary parameters, including the LAN
port for IPTV connection, are predetermined. If not, select the LAN type to
determine which port is used to support IPTV service.
4 ) Click SAVE.
5 ) Connect the set-top box to the corresponding LAN port which is predetermined
or you have specified in Step 3.
Done!
Your IPTV setup is done now! You may need to configure your set-top box before
enjoying your TV.
Mode
according to your ISP.
if your ISP is not listed and no other parameters are required.
if your ISP is not listed but provides necessary parameters.
Customize Your Network Settings
70
Publicité
