Publicité
Chapter 13
13 3
Specify DHCP Server Settings
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of the DHCP Server if
necessary, and you can reserve LAN IP addresses for specified client devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
•
To specify the IP address that the router assigns:
1. Tick the
Enable
checkbox.
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the router.
4. Click SAVE.
•
To reserve an IP address for a specified client device:
1. Click
Add
in the
Address Reservation
Network
>
DHCP
Server.
section.
Customize Your Network Settings
IP Address
Pool.
Default Gateway
is automatically filled in
71
Publicité
