Using The Product; Setting The Clock; Setting The Alarm - DNT IP-dio mini Mode D'emploi

Using the product

SELECT button. Repeat this procedure until all characters are shown in the display.
Finally rotate the dial to select END und press press the SELECT button.
Now the display shows a list of stations.
Select the Station you want to listen to in the list and press the SELECT button to confi rm.
It doesn't matter, if you use lower and upper case characters for the search string. If you make
a mistake at any point, press the BACK button to edit the last character.

Setting the CLOCK

You don't need to setup the clock, because it is automatically updated by internet for GMT+1,
which is used most countries in Europe.
If you make a mistake at any point, press BACK button to go back to the previous screen.
The display says Time and Date Set with the new time shown beneath for 3 seconds, and then returns to the
radio station display.
The 24/12 format are alternative, you can set it via menu: Confi gure\Clock setup\Clock Format;

Setting the ALARM

If you make a mistake at any point, press BACK button to go back to the previous screen.
Press the Back button.
Rotate the dial until the display says<Confi gure>.
Press the SELECT button.
Rotate the dial until the display says<Clock>.
Press the SELECT button.
Rotate the dial until the display says<Set Time>.
Press the SELECT button
Rotate the dial until the hour setting is correct, then press the SELECT
button.
Rotate the dial until the minute setting is correct, then press the SELECT
button.
Rotate the dial until the date setting is correct, then press the SELECT
button.
Press the Back button to return to Main menu.
Rotate the dial until the display says<Alarm clock>.
Press the SELECT button.
- 32 -