Choosing A Radio Station To Listen To; Search A Station - DNT IP-dio mini Mode D'emploi

Using the product

Choosing a radio station to listen to

Search a station (located in the menu item stations)
You can directly connect the radio to a station using the search function. The display shows the characters in
the 1st line and the input fi eld in the 2nd line.
Rotate the SELECT button until the 1st character is locatate in the middle of the display and press the
To enter the code, rotate the dial to select each character of the code in
turn, pressing the SELECT button after each character.
Make sure the character you want is shown in the centre of the display to
be able to select it.
WEP and WPA codes are case sensitive to upper and lower case charac-
ters so you must enter them exactly.
After the fi nal character, rotate the dial to select END and press the SELECT
key.
The display shows "Connecting to network" as the radio connects to the
network.
Then it will be displayed:
You my see a message saying <Station Update From Reciva>. This indi-
cates that some new radio stations may be available since you last con-
nected, or others may have ceased to broadcast. The list of available
stations will change.
With <Station> the highlighted menu, press the SELECT button.
If the screen does not display<stations>, rotate the dial until it does and
then press the SELECT button.
Rotate the dial to choose from <Location>or <Genre>.
<Location>enables you to choose a station from a particular country.
<Genre> enables you to choose radio stations according to their content,
for example 90s, Classical, Dance or Rock.
Press the SELECT button to choose the option you want.
The display will show the number of stations that are loading. The 1st sta-
tion name will be displayed – stations are listed alphanumerically.
Press SELECT key for the stations you would like to listen.
The display will show <Station Selected Buffering x%> while the station are
buffering.
When you are listening to a particular station, the following information will
show on the display:
For example:
BBC Radio 1: Station Name
32 kbps WMA: Transmission Information
Real Enabled: Media player capabilities
- 31 -
Getting started