Publicité
Les langues disponibles
Les langues disponibles
Cordless drill/driver
– Steel
mm
Max. screw diameter
mm
Tool holder
Weight according to
EPTA-Proced-
ure 01:2014
B)
Recommended ambi-
ent temperature dur-
ing charging
Permitted ambient
temperature during
operation and during
storage
Recommended re-
chargeable batteries
Recommended char-
gers
A) Measured at 20−25 °C with rechargeable battery GBA 12V 6.0Ah.
B) Measured with GBA 12V 2.0Ah and GBA 12V 6.0Ah.
Noise/vibration information
Noise emission values determined according
to EN 62841-2-1, EN 62841-2-2.
Vibration total values a
(triax vector sum) and uncertainty K determined according to EN 62841-2-1, EN 62841-2-2.
h
Drilling into metal:
a
h
K
Screwdriving:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
Bosch Power Tools
GSR 12V-35 FC
GFA 12-X
10
8
6.35 (¼")
6.35 (¼")
kg
0.77–1.0
°C
0 to +35
°C
–20 to +50
GBA 12V...
GAL 12...
GAX 18...
Typically, the A-weighted sound pressure level of the power
tool is 73 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
GSR 12V-35 FC GFA 12-X GFA 12-B GFA 12-E GFA 12-W
m/s
2
m/s
2
m/s
2
m/s
2
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
u
Removing the battery (see figure A)
u
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
GFA 12-B
GFA 12-E
–
–
–
–
0.8–10
6.35 (¼")
0.1
0.2
–
–
–
–
–
–
–
–
–
–
3.6
–
–
1.5
< 2.5
< 2.5
–
1.5
1.5
–
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 815 | (15.07.2022)
English | 17
GFA 12-W
–
–
–
–
6.35 (¼")
0.3
0.3
–
–
–
–
–
–
–
–
–
–
–
–
< 2.5
< 2.5
1.5
1.5
Publicité
