Télécharger Imprimer la page

MW TOOLS BDP50 Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

7.2 Key lock function
If the keys T and P are pressed for 2 seconds at the same time, the defrost light will keep shining at the speed of 50 Hz, and all
the keys on the control panel will be in lock, but it can be unlocked by the same action again.
7.3 Pipe function
As to a much wetter space, use a plastic pipe with diameter larger than 6.7'', and tie the pipe to hood, it will be much faster
and more effective to make it dry.
7
8 Maintenance
8.1 Cleaning the air filter
WARNING!
Ensure the dehumidifier is turned OFF and plug is removed from the power socket before
maintenance is carried out.
The working performance of the humidifier will be greatly reduced if the filters become blocked.
1. Remove two knobs.
2. Remove the air inlet grille as shown below.
3. Remove the filter as shown below.
4. Vacuum any debris from the filter using the vacuum hose and nozzle attachment.
5. Using luke-warm water and a mild detergent, wash the filter and allow to dry.
6. Once dry, re-install the filter into the dehumidifier.
Air Filter
AIR Inlet Grille
Screw
a. Remove two knobs.
b. Remove the air inlet grille as shown above.
c. Remove the filter as shown above.
d.
plastic pipe
M1.2.BDP50-BDP70-BDP90.NLFREN - 03042024
18
EN

Publicité

loading

Ce manuel est également adapté pour:

Bdp70Bdp90722313789722313790722313791