Publicité
Les langues disponibles
Les langues disponibles
Prepare the Grill for Lighting
1. Open the hood completely. Do not light burners with the hood
closed.
2. Make sure control knobs are turned to OFF. The drip pan must
be in place and pushed all the way to the back.
A
A. Drip pan
Turn the Gas Supply On
For outdoor grills using gas supply source other than 20 lb LP gas
fuel tank: Open the manual shutoff valve in the gas supply line.
The valve is open when the handle is parallel to the gas pipe.
A
Lighting the Grill and Infrared Sear Burner
IMPORTANT: If burner does not light immediately, turn the burner
knob to OFF and wait 5 minutes before relighting.
1. Open the hood completely. Do not light burners with the hood
closed.
2. Do not lean over the grill.
3. Select the burner you want to light. Push in and turn the grill
burner control knob to IGNITE/HIGH or IGNITE/ON, while
continuing to hold it in.
4. You will hear the "snapping" sound of the spark. When burner
is lit, release the knob. Turn knob to desired setting.
5. Repeat for each of the other burners as needed.
IMPORTANT: If burner does not light immediately, turn the
burner knob to OFF and wait 5 minutes before relighting.
B
A. Closed valve
B. Open valve
11
Publicité
