Publicité
Les langues disponibles
Les langues disponibles
C
Cleaning and maintenance
Press the dust cup release button.
Remove the dust cup, whilst making sure to keep it upright.
Press the two tabs at the top of the dust cup and pull upwards to separate the assembly
from the dust cup.
Empty the dust cup's contents into a bin.
Pinch the edges on the top of the foam filter and remove it. Tap it to remove any excess dust.
To fully reassemble the dust cup, place the foam filter on top of the permanent filter
and reposition the filter assembly in the dust cup.
Place the top edge of the dust cup over the grey protruding section and push until
it clicks into place.
Cleaning the dust cup and filters
•
Remove the dust cup from the main unit, as indicated in the "Emptying the dust cup"
section. Remove the filter assembly, followed by the foam filter, and empty the dust cup's
contents.
Twist the bottom of the permanent filter assembly clockwise, then pull it out to separate
it from the top of the filter. Remove the inner part from the bottom of the filter. Tap the
permanent filter assembly's 3 components over a bin to dislodge any dust.
Tap the dust cup and filters to remove any excess dust, then rinse them under a tap.
Shake them to remove any excess water and thoroughly dry all the parts.
•
To reassemble the filters and dust cup, carry out the steps in reverse order.
•
Secure the newly reassembled dust cup to the main unit.
CAUTION! To prevent damage to the unit, only use dry,
intact filters!
22
EN
Publicité
