Publicité
Les langues disponibles
Les langues disponibles
C
Cleaning and maintenance
Cleaning and maintenance
CAUTION!
• To prevent the risk of electrocution, always turn off and
unplug the unit from the mains socket before cleaning it.
• Never immerse the main unit, or the power cable
(including the plug) in water or any other liquid. Never
rinse them under a tap.
NOTE: Under no circumstances should solvents, chemical
or abrasive cleaning agents, wire brushes, sharp objects
or scouring pads be used to clean the vacuum.
• Detach all the tools and dust cup from the main unit before
cleaning.
• Empty the dust cup after each use. Do not exceed the MAX mark
indicated on the dust cup.
• Clean the dust cup at least once a month, or more frequently
is necessary.
Main unit
Brush
Extension tube
Dust cup
Foam filter
Permanent dust filter
2-in-1 brush
• Once these elements are dry, they can be reassembled.
Emptying the dust cup
•
To empty the dust cup, turn off the vacuum cleaner.
•
Detach the extension tube and/or vacuum tool from the main unit's air inlet.
Use a slightly damp soft cloth to clean these. Dry well.
Rinse them under a tap or wash them in soapy water
with a soft sponge. Shake off any excess water and allow
them to thoroughly air dry.
21
EN
Publicité
