Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
Operation
• Plug the power cable plug into the mains socket.
• Slide the On/Off switch downwards to turn on the vacuum.
• Slide the On/Off switch upwards to turn off the vacuum.
•
Empty the dust cup before its contents exceed the "MAX" level mark (see Emptying the
dust cup in the Cleaning and Maintenance section).
•
Always turn off the unit when you have finished using it. To clean the unit, follow the
instructions in the Cleaning and Maintenance section.
NOTE: When vacuuming heavily soiled surfaces, regularly turn the unit off and
check the mouth of the tool to ensure that it is clean and to avoid scratching
delicate surfaces.
Installing the wall mount
NOTE:
•
Securely install the wall mount on a wall that is strong enough to support
the weight of the unit.
•
Install the wall mount in a dry area, away from extreme heat or cold, and
ideally close to a mains socket.
The wall mount (with the supplied wall plugs and screw) can be installed to easily store the
vacuum cleaner.
Place the wall mount on the wall, leaving a space of 105-125 cm between the floor and
the bottom of the wall mount. Mark the drill holes for the screws with a pencil. Then, drill
the holes and insert the wall plugs. Place the wall mount over the wall plugs and tighten
the screws using a screwdriver.
DANGER! RISK OF ELECTRIC SHOCK!
•
Do not pierce any electric cables or water pipes located in the wall.
•
Do not install the wall mount on a metal wall.
20
EN
Publicité
