Power and Sound Controls
continued
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
VOLUME
*
BASS
*
TREBLE
*
I
FADER
«■
BALANCE
Bass and Treble
• Press SEL to select the BASS (TREBLE) mode, press "VOL^" or
"VOL'/" to increase or decrease the bass/treble response.
-12 to 12
-12 to 12
• Press "VOL^" or "VOL''" for more than a half second to change
numeric levels on the display rapidly.
Balance
/
• Press SEL to select the BALANCE mode.
Press
"VOL/'"
or
"VOL'/"
to shift the sound volume to right or left speakers.
or L
1 to 15
Balance Center
• Press "VOL/'" or "VOL'/" for more than a half second to change
numeric levels on the display rapidly.
Fader
• Press SEL to select the FADER mode. Press "VOL/'" or "VOL'/"
to shift the sound volume to the front or rear speakers.
or R 1 to 15
Balance Center
• Press "VOL/'" or "VOL'/" for more than a half second to change
numeric levels on the display rapidly.
Note:
When a control mode (BAS/TRE/BAL/FAd) is selected but no operation is made within 5 sec¬
onds, the display will return to the normal operation (volume adjustment) mode. In such a case,
press SEL again to select the next control mode.
8
CQ-DP745/730EUC