Publicité
Les langues disponibles
Les langues disponibles
Power and Sound Controls
Power
If the car is not already running, turn the key in the ignition until the
accessory indicator lights.
Press PWR to switch on the power.
Volume
Press "VOL^" or "VOL^" to increase or decrease volume.
UDL
SO
Volume Level
Oto 40
Press "VOL^" or "VOL'/" for more than a half second to change
numeric levels on the display rapidly.
Attenuator
• Press ATT. Volume will decrease to about 1/10 of its previous level.
• Press ATT again to deactivate when listening at normal volume.
ATT
Tone Enhancement
<For CQ-DP745EUO
Press and hold LOUD (ATT) for more than 2 seconds to enhance
bass and treble tones when listening at low or medium volume. Press
and hold LOUD (ATT) for more than 2 seconds again to deactivate.
<For CQ-DP730EUC>
Press LOUD ( H) to enhance bass and treble tones when listening at
low or medium volume. Press LOUD (Q) again to deactivate.
LOUD
Note:
This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume
level adjuster so that you will not be deafened sudden loud volume.
This system operates as follows. When PWR is switched on, the volume level is low. After that, the
volume level gradually returns to its previous level prior to switching off the unit.__
Publicité
