PROUSER DRC4321 Mode D'emploi page 2

INTRODUCTION
The Pro-User DRC4321 is a member of the family of advanced car back-up systems
manufactured by Pro User.
The Pro-User Digital Back-up Camera and Monitor with built in transmitter box, when
used as described, will improve your ability to see behind your car, camper, trailer, truck
or mini-van. We have taken numerous measures in quality control to ensure that your
product arrives in top condition, and will perform to your satisfaction.
Please carefully read and follow the following safety and operating instructions.
IMPORTANT SAFETY INSTRUCTIONS
Before You Install
If you are not confident working with 12V/24V DC vehicle wiring, removing and
reinstalling interior panels, carpeting, dashboards or other components of your vehicle,
contact the vehicle's manufacturer, or consider hav
installed.
Please check before the complete installation if the device works. This can be done that
you connect the display in the cigarette plug and at the same time connect the wires of
the rearview unit to a 12V source like the car battery or external source. If the picture
appears you can continue with the installation. If there is no transmission please check
the wiring and pairing. Make sure the device is working well before final installation.
Innovation: No Interference
This device is free from interferences coming from Bluetooth, cell phones, Wi-FI routers,
power lines and other various electrical equipment.
However, please bear in mind that too great a distance from the camera to the monitor
can lead to transmission problems. Superstructures, partition walls, etc. or reflective
or vapourised panes also impair the radio signal.
Repair
The camera system should not be opened. Any attempt at modification or repair by the
user will entail the
Storage of Display:
Please stow the monitor when not in use or when the vehicle is parked to prevent the
monitor from overheating due to sunlight or heat build-up.
loss of your guarantee.
ing the camera system professionally
2