Télécharger Imprimer la page

Crivit 373657 2104 Notice D'utilisation page 40

Publicité

Les langues disponibles

Les langues disponibles

• The protective effect of the helmet can be seriously impaired by the effects
of paints, stickers, cleaning fluids, or other solvents .
• The helmet should protect your head in the event of an impact . This pro-
tection is no longer provided even after a single impact (even if it is light) .
Therefore the helmet must be replaced immediately after an accident even
if there is no visible damage .
• Never use solvents or scouring agents that contain petroleum to clean the
helmet, either on the outside or the inside . Always use a detergent that is
pH neutral and diluted with clear water; rub the article carefully with a soft
cloth . Then wipe it dry with a lint-free cloth . The padding can be cleaned
with a little soap and a soft brush .
• Only use original replacement parts for your helmet .
• The LED light is not a safety aid and on no account replaces the specific
devices that are compulsory in accordance with traffic regulations .
• The lifespan of the article depends on its use . However the article must be
replaced five years after the date of manufacture (version: 11/2021) at the
latest .
Warnings on batteries!
• Remove the batteries if they are empty or if the product is not going to be
used for an extended period .
• Do not use different battery types or brands, new and used batteries in
combination, or batteries with different capacities, as they leak and can
thus cause damage .
• Observe the polarity (+/–) when inserting batteries .
• Change all batteries at the same time and dispose of the old batteries
properly .
• Warning! Batteries may not be charged or reactivated in any way . They
may not be dismantled, thrown into fire, or short-circuited .
42
GB

Publicité

loading