Publicité
Les langues disponibles
Les langues disponibles
Operation
Paper / Credit Card Entry:
Make sure you do not exceed sheet
count per pass (6 sheets max). In-
sert paper as straight as possible
into feed slot and release.
LED Status Indicator:
• Ready (Power On):
The Green LED light indicates the shredder is "On" and ready to operate when paper is inserted.
• Overheat:
Red light – Shredder has shred continuously beyond the maximum shred time and needs to
cool down before operation can restart. If this happens, switch the shredder off for 30 minutes
or longer before resuming normal operation.
Note:
• Always turn off and unplug the shredder when not in use.
• This shredder will shred staples and small paper clips. It is recommended that you remove
paper clips whenever possible to extend the lifespan of your shredder.
• Only shred credit cards by feeding them vertically i n to the middle of the feed slot, releasing
when shredding begins. Never feed more than one credit card at a time.
• Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in
extensive damage to the shredder. Overfeeding will strain the machine and quickly wear
and break the cutting blades and internal components.
• Overheating with extended use: In the event that the shredder has shred continuously
beyond the maximum running time and overheating, the unit will automatically shut off.
If this happens, switch the shredder off for 30 minutes or longer before resuming normal
operation.
Insert one credit card at a time into
the middle of the feed slot.
ENGLISH
7
Publicité
