Publicité
Les langues disponibles
Les langues disponibles
Operation
Control Switch
Using the switch located on the unit, select one of the following
settings by sliding the switch either left or right. (FIGURE 2)
I Auto / On:
This setting allows the shredder to be automatically started by inserting paper into the feed
slot. Always feed the paper in as straight as possible. When the paper has passed through,
the shredder will automatically stop.
O Off:
This setting turns off all features of the shredder. For safety reasons, we recommend that you
leave the shredder in the "Off" position whenever the shredder is unattended or not in use.
Reverse:
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that did not pass through. Never attempt to clear a jam by using the reverse func-
tion until you have emptied the wastebasket.
CONTINUED NEXT PAGE
6
ENGLISH
FIGURE 2
Publicité
