Maintain the ventilation openings in the appliance
enclosure or in the built-in structure, free of
obstruction.
Never use water to wash the compressor position,
wipe it with a dry cloth thoroughly after cleaning to
prevent rust.
Handle the appliance always with at least two persons
because it is heavy.
Install and level the appliance in an area suitable for its
size and use.
Make sure that the electrical information on the rating
plate agrees with the power supply. If it does not,
contact an electrician.
The appliance is operated by a 220-240 VAC/50 Hz
power supply. Abnormal voltage fluctuation may cause
the appliance to fail to start, or damage to the
temperature control or compressor, or there may be
an abnormal noise when operating. In such case, an
automatic regulator shall be mounted.
Only for UK: The appliance's power cable is fitted with
3-cord (grounding) plug that fits a standard 3-cord
(grounded) socket. Never cut off or dismount the third
pin (grounding). After the appliance is installed, the
plug should be accessible.
Make sure that mains cable is not caught under the
appliance during and after carrying/moving the
appliance, to avoid the mains cable becoming cut or
3