habitat et jardin DIMI Mode D'emploi page 24

FOLDING UP AND SETTING DOWN
NOTE: Ensure the Power Switch is in the 'OFF' position and the power cord is unplugged from the electrical outlet.
FOLDING UP：
 Holing the rear end of deck directly by one hand and then lift the deck up until the Cylinder(A)
'pops' down into the locked position.
Note: Check the Cylinder (A) 'pops' down into the locked position before moving the treadmill.
TO PREVENT ANY INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN LIFTING UP OR SETTING
DOWN THE DECK.
SETTING DOWN:

Holding the rear end of deck by one hand and then use your foot to push the Cylinder(A)to set down the deck of
the treadmill.
Note: Do no stand under the deck when setting down the treadmill
USAGE OF SILICONE OIL
Pull up tightly of the running belt. Then put the silicone oil to running
board. Then start the machine to running 3 minutes without loading. It
is better to maintain like this every 30 hours working of the machine.
This can save lifetime of parts properly.
23