Publicité
Les langues disponibles
Les langues disponibles
Step By Step
1.
Plug the Power Cord into the wall outlet. Once the appliance is plugged in, it
will beep once. The display will light up.
2.
Select the desired Cooking Preset. The preset time will be displayed. Press
the START/STOP Button once to start the cooking process.
3.
Depending upon the cooking mode, the time countdown will not begin until
predetermined cooking temperature is reached.
NOTE: Stirring is set to STIR OFF until preheat is complete. If desired, you can turn on
the stirring during preheat by pressing the stirring button.
4.
When the cooking time has elapsed, the appliance will switch to KEEP WARM
for most cooking modes. The appliance will count up to show how long it has
been on KEEP WARM.
STIRMAX
STIRMAX is a smart cooking function with two stages of cooking. The first stage is a
high temperature stage with stirring set to STIR LOW. When the first stage of cooking
is complete, the appliance will automatically transition to the second stage of gentle
simmer with stirring set to STIR LOW.
1.
Plug in the appliance. The default display (----) will start flashing.
2.
Assemble the stirring paddle onto the stirring motor shaft. Cover the pot with
the lid to speed up the preheating time.
3.
Press the Cooking Preset Button until the LED adjacent to STIRMAX function
is blinking.
4.
The display will show the default time 10:00. You can adjust the cooking time by
pressing or holding down the TIME arrows.
NOTE: Adjusting the time on the display will adjust the time for this first cooking stage.
5.
Press the START/STOP button to start the preheating cycle. The display will
gradually illuminate the border of the display to indicate preheating progress.
Once preheat is complete, the appliance will beep twice and begin the
cooking timer.
6.
Add the ingredients you would like to saute.
7.
When the first stage of cooking is complete, the appliance will automatically
transition to the second stage of gentle simmer with stirring set to STIR LOW.
The default time for this stage is 40 minutes, but can be adjusted once the
stage begins by pressing the TIME arrows.
8.
Add the ingredients that you want to gently simmer.
9.
When the cooking cycle is complete, the appliance will beep three times and
automatically switch to KEEP WARM. The display will start counting up from
zero to 4 hours (00:00 to 04:00).
14
MC107DSeries_31148_ESF_IB_C.indd 14
MC107DSeries_31148_ESF_IB_C.indd 14
8/22/24 3:06 PM
8/22/24 3:06 PM
Publicité
