Publicité
Les langues disponibles
Les langues disponibles
Safety instructions
˜ General power tool safety
warnings
m
WARNING!
u
Read all safety warnings,
instructions, illustrations and
specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool .
Work area safety
1 . Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
2 . Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes .
3 . Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control .
Electrical safety
1 . Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock .
2 . Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded .
3 . Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of electric
shock .
4 . Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp edges or
moving parts . Damaged or entangled cords
increase the risk of electric shock .
5 . When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the
risk of electric shock .
6 . If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock .
Personal safety
1 . Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury .
2 . Use personal protective
equipment. Always wear eye protection .
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries .
GB/IE
43
Publicité
