NEC MultiSync LCD1550M Mode D'emploi page 9

Quick Start
–continued
7. This LCD monitor is designed for use with a flexible arm.
Please use the attached screws (4pcs) as shown in the picture when
installing.
To meet the safety requirements, the monitor must be mounted to an arm
which guaranties the necessary stability under consideration of the
weight of the monitor.
The LCD monitor shall only be used with an approved arm (e.g. GS
mark).
Replace screws.
Tighten all screws.
Specifications
4-SCREWS
(MAX depth:10mm)
Weight of LCD Assembly:
3.5kg (MAX)
7