Hoover D 73 Mode D'emploi page 9

Watercontrol-system (D 73 A)
The water-stop device protects against water damages caused by
leaks on the fill hose which could develop due to natural ageing
of the hose.
In the water-stop system the leaking water fills the corrugated
hose and activates a stop valve which cuts off the water supply to
the machine.
This fault is shown by a red sector on the window «A».
Would this occur, please refer to your Service Agent.
If the hose is not long enough for correct connection, it must be
replaced with a longer one. The hose can be obtained from your
Service Agent.
All manuals and user guides at all-guides.com
Safety antitwist device
(press and twist to
remove the washer)
A
Red button blocked
valve indicator
16
Beschreibung der Bedienelemente
E
A B
A
Start/Stop Taste
B
"65°C" Taste
C
Griffmulde zum Öffnen der Tür
Maße:
Höhe
cm
Breite
cm
Tiefe
cm
Tiefe bei geöffneter Tür
cm
Technische Daten:
Fassungsvermögen (EN 50242)
Ventildruck der Hydraulikanlage
Absicherung
Gesamtanschlußwert
Spannung
C D
D
Programmwahlschalter
E
Funktionslampe
onne Arbeitsplatte
mit Arbeitsplatte
82
85
59,8
60
56,3
60
117
120
12 Maßgedecke
Min. 0,08 - Max 0,8 MPa
(s. Matrikelschild)
(s. Matrikelschild)
(s. Matrikelschild)
17