Prowork SMJ 500E Mode D'emploi page 7

Anleitung SMJ 500 E SPK 1
Scope of delivery package
SMJ 500 E,
Quick-change drill chuck 2 -13 mm,
Additional grip with bit stop
Description
1 Quick-change drill chuck
2 Depth stop
3 Additional handle
4 Selector button: drill/hammer
5 Selector button:
clockwise/anticlockwise
6 Speed control
7 Locking button
8 On/Off switch
06.05.2003 9:02 Uhr Seite 7
Technical data
Voltage: 230 V ~ 50 Hz
Power rating:
Drilling capacity Concrete 13 mm
Steel 10 mm
Wood 20 mm
No Load Speed 0 - 3000 min
Safety insulated
Sound pressure
level LPA 89,2 dB(A)
Sound power
level LWA 102,2 dB(A)
Vibration a w
Weight
Caution
The SMJ 500 E is not designed
for the operating of auxiliary
devices.
Do not use near steams or
inflammable liquids.
Only use sharp bits and suita-
ble screwing bits.
Remove the plug from the
socket for all adjusting and
cleaning work.
Protect the mains cable against
any damage. Oil and acids can
damage the cable.
Do not carry the device by the
mains cable.
Do not remove the plug from
the socket by pulling the mains
GB
500 W
-1
II /
22,5 m/s
2
1,9 kg
7