Velleman CAMIP23 Mode D'emploi page 6

1. Tap Register.
5. Check both LED indicators.
If both are always on, tap
Yes.
8.3 Manual Network Setup
You can configure the network setup manually as follows:
1. Write down the IP address of your wireless router. You will need it later. To find the IP address,
proceed as follows:
V. 01 – 06/05/2015
CAMIP23
2. Fill in the information
needed and tap "Register".
6. Fill in your device's MAC
address (the address can
be found on the back or
the bottom of your device)
and tap Apply.
6
3. Select your device type.
For a wireless camera, tap
the lower icon.
4. Connect your camera as
shown on the screen and
tap Ready when the
camera is on.
7. A preview of your camera
appears. Check if the
camera is oriented the
way you want.
8. Fill in a name for the
camera next to Device title
(for example: "Office").
9. Tap Apply to finish.
©Velleman nv