Publicité
All manuals and user guides at all-guides.com
INTRODUCTION
Inspiring the joy of listening
Technical Audio Devices Laboratories, Inc. (TADL) grew from the spirit to discover technologies to perfectly recreate the pure
sound of live performances with uncompromising craftsmanship. We have inherited our philosophy from Bart Locanthi—
recognized across the globe as the ultimate sound technologist—who believed that genuine technology is true to the basics
and that genuine technology places greater importance on sound quality than on technology for its own sake.
At TADL, we are honing our technology to create equipment that reproduces musical sounds that evoke both the energy and
impact of live music.
Features
Symmetry: Duallogic-Circuit Technology
In order to drive the speaker diaphragms correctly, it is crucial that the positive and negative current paths in the voice coils
be precisely symmetrical. Toward the end of achieving this perfect balance, we have incorporated symmetrical design in the
current mode, electrical circuits, and speaker structure.
Damping technology: Vibration-Absorber Technology
Improvements in the quality of vibration damping have been achieved by using cast iron as a low-resonance material for
the chassis, adopting an adjustable point-support structure for the spikes and a 10 mm-thick aluminum vibration damper
between the transformer and chassis.
Low center of gravity: Lower Weight-Balanced Frame
The monocoque chassis is constructed from 35 kg of cast iron in order to produce a massive and stable foundation. In
addition, the TAD-M600 has adopted a wide-tread chassis structure by locating the legs on the outer edges of its body, further
lowering its relative center of gravity.
Drive power: 600 W/4 Ω rated output
A balanced-amplifier connection has been used to combine a 5-parallel push-pull amplifier with multi-emitter transistors
producing brilliant high-frequency characteristics, so that the TAD-M600 can output 600 W/4 Ω, 300 W/8 Ω with ease.
High-capacity power source
A power transformer consisting of two El 133 x 85 transformers and a high-capacity filter condenser consisting of four
33 000 μF are used to create a high-power source strong enough to accurately drive the speakers even at high output levels.
Protection circuit
In the event of a short circuit in the speaker terminals, electrical overload, or abnormal heating due to a contingency, the
protection circuit is activated. When activated, this circuit shuts off the power to the amp in order to prevent further heating,
while informing the user through the color of the power indicator light. This protection circuit function assures your amplifier
and speakers of safety from damage resulting from such anomalies.
TAD-M600
5
Publicité
