GRAUPNER PRX-5A Notice D'utilisation page 17

PRX-5A
Power for Receiver
Battery voltage / Output voltage / Additional notes Battery voltage / Output voltage / Additional notes
The PRX delivers the set output voltage to the receiver according to the desired value
(5.1 V | 5.5 V | 5.9 V) - provided that the battery voltage is high enough.
- The battery voltage must be more than 0.1 V above the selected output voltage, otherwise
the PRX will be unable to deliver the desired output voltage.
- If this is not the case, then the output voltage will be 0.1 V below the actual battery voltage.
- If the battery voltage falls below 4 V, stable operation of the PRX is impossible.
Set contents
No. Quantity Description
01 1
02 2
03 2
04 2
05 1
06 1
07 2
08 1
08
07
PRX stabilised receiver power supply
Adapter lead for batteries with GRAUPNER|JR connector
Adapter lead for batteries with G2 connector
Adapter lead for batteries with BEC connector
Vibration absorber
Drilling template / sticker
Retaining screw
Operating instructions
05
04
03
17
01
02
06