Télécharger Imprimer la page

HOMCOM 853-009 Mode D'emploi page 9

Masquer les pouces Voir aussi pour 853-009:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Troubleshooting
Common problems
No vapor is erupted, and the
indicator light is off.
Big noises are generated in
the air duct, and the amount
of erupted vapor is small.
The ironing brush head leaks
water.
The connection between air
duct and main body leaks
water.
The water in the water tank
flows out.
Hot vapor is generated in the
water tank.
The amount of vapor is small.
Not working
The vapor output is irregular.
The ironing brush head drips
water.
Reason
The machine is not powered
on.
The temperature controller or
thermal protection is damaged.
The internal wire falls off.
The air duct is bent to below
the horizontal line for ironing.
The ironing brush head is
broken.
Flatwise operation
Is the seal ring age?
Is the connection loose?
The water tank is broken or
has a hole.
Is the water pipe blocked?
Is the voltage too low?
Is the pipe blocked by
incrustation?
The water tank has no water.
The heating element made of
aluminum burns out.
An internal component fails.
precipitation.
The vapor condenses in the
air duct or the ironing brush
head.
The vapor condenses in the
air duct.
8
Troubleshooting
Insert the plug into the power
socket.
Ask a professional for
inspection and service.
Ask a professional for
inspection and service.
Raise the air duct to allow the
condensate water flow back
into machine.
Replace the ironing brush
head.
Up and down vertical moving
for operation
Replace the seal ring.
Tighten the air duct
connection.
Replace the water tank.
Clear the dirt and obstruction.
The demand for electricity
may be at its peak.
Is a high-power electrical
appliance operating? Power it
off until the voltage is stable.
Please use a environmentally
friendly detergent.
Ask a professional for
inspection and service.
Raise the ironing brush head
to keep the air duct vertical, so
that the condensation water
flows back to the heating
element made of aluminum.
Raise the ironing brush head
to keep the air duct vertical, so
that the condensation water
flows back to the heating
element made of aluminum.

Publicité

loading