HOMCOM 853-009 Mode D'emploi page 5

Water tank knob
1-2 Installation Procedure
① Insert the extension-type aluminum pole into its holder, as shown in Figure 1.
② Rotate the extension-type pole fixing knob clockwise, as shown in Figure 1.
③ Install the vapor nozzle and the clothes hook and hanger downward, in the direction
as shown in Figure 2.
④ Pull open the two locking buttons (as shown in Figure 3) and pull up the extension-
type aluminum pole, to pull out the three aluminum pole sections and adjust to a
appropriate position, and then press the button (as shown in Figure 4)
⑤ As shown in Figure 4, insert the vapor hose into the vapor outlet of the main body, and
tighten the vapor hose fixing knob clockwise.
Figure 3
⑥ When ironing a fur product or brushing an ash layer, please install the hairbrush head
(optional) on the vapor hose nozzle as shown in the figure, and then put the vapor
hose nozzle on the hook. If ironing any other cloth, do not install the hairbrush (Figure
6).
⑦ Screw the water tank knob anti-clockwise (Figure 7), inject clean cold water into the
water tank, and tighten the water tank knob clockwise as shown in Figure 8.
Figure 1
Figure 4
4
Drainage (for boiler cleaning)
knob
Figure 2
Figure 5