Product-Specific Hazards; Residual Hazards; Emergency Measures - Mettler Toledo EasyClean 100 Instructions D'utilisation

EasyClean100/150
EasyClean100/150
52 500 178

2.7 Product-specific hazards

Electrical hazards!
Opening the unit for installation or repair work exposes live electrical parts.
Close the unit immediately after work is completed!
Compressed air/water hazards!
Pressurized pipes (compressed air, water) must be isolated and depressurized before
commencing repair work!

2.8 Residual hazards

Despite all precautionary measures, there remain residual hazards such as:
– a pipe bursting
– hazards arising from a defect in a supervisory controller.

2.9 Emergency measures

Should fluid come into contact with the eyes, rinse thoroughly under running water for
at least 15 minutes. A doctor must be consulted for subsequent diagnosis.
Fluid coming into contact with the skin must be immediately washed away with water.
Medical assistance is mandatory for symptoms that clearly arise from skin or eye
contact with a medium. Inform the doctor about the type and specific identity of all
materials used.
© 11/14 Mettler-Toledo AG, CH-8606 Greifensee
Printed in Switzerland
13