MZ electronic HC200 Instructions D'utilisation page 13

Information to the User
This Manual reflects the current state of the art of the equipment and cannot be considered inadequate just
because it is updated on the basis of new experiences; the Manufacturer reserves the right to update
production and manuals, without the obligation to update previous production and manuals. The
characteristics of the materials can be changed at any time, according to the technical evolution, without
prior notice.
o
The Manufacturer is relieved of any liability in the event that the equipment is made:
o
improper use;
o
use by untrained personnel;
o
use contrary to the provisions of this Manual;
o
use contrary to current legislation and legislation;
o
use with primary power failure;
o
use with serious deficiencies in scheduled maintenance;
o
use with modifications or interventions not explicitly authorized by written notice from the
Manufacturer;
o
use with use of non-original spare parts or not specifically defined by model;
o
use with total or partial non-compliance with the instructions contained in this Manual
Construction technology
The equipment has a construction technology that is based on the transmission, through a carrier wave, of
information in radio frequency.
Safety devices
The equipment does not present any particular risks during its use. The radio frequency does not generate
a dangerous environment.
o
Do not use there equipment for others purposes that not are those for there which And was
built
o
The normal arrest from the equipment needs to be executed with the special commands
located on panel.
o
Do not approach at the equipment with materials explosives od flammable.
o
Do not use the equipment in ATEX or potentially explosive environments
ATTENTION
IT IS PROHIBITED TO HANDLE THE EQUIPMENT AND TO USE IT FOR
PURPOSES OTHER THAN THAT ESTABLISHED BY THE MANUFACTURER.
.
HC200 13
English
Rev. 04-2022