Publicité
Remote Control Operating Procedures:
(1) Power:
Press to turn the unit ON/OFF
(2) Flame:
Press to adjust the level of brightness of the flame: F5- F4- F3- F2- F1- OFF. (F5 being the brightest and F1 the dimmest)
: raise the level of flame brightness,
: lower the level of flame brightness.
(3) Timer:
Press to adjust the duration of the heater: 30 min- 1H- 2H- 3H- 4H- 5H- 6H- 7H- 8H- 9H- OFF
(4) Down Light:
Turn the down light ON and OFF.
(5) Log:
Press to adjust the level of brightness of the log: L5- L4- L3- L2- L1- OFF. (L5 being the brightest and L1 the dimmest)
: raise the level of log brightness,
: lower the level of log brightness.
Press to turn the heater ON/OFF. Adjust the temperature rating as follows: 62°F -- 82 °F (17 °C --- 27 °C) Note: ℉ for the
(6) Heater:
default units.
: raise the temperature rating,
: lower the temperature rating.
Note: Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-Zinc) or rechargeable (nickel-cadium) batteries.
The heater will turn on when temperature is set higher than the room's temperature and it will automatically
turn off when the room has reached the desired temperature.
17 |
(1)
(2)
(3)
Self Regulating Heater
(4)
(5)
(6)
Publicité
