Dik Geurts Vidar Wall Instructions D'installation page 24

1. Introduction
As a manufacturer of fires, DRU Verwarming develops and produces products according to the highest possible
English quality, performance and safety requirements. These woodburning Dik Geurts fires are provided with a CE
mark that is only awarded for fires complying with the essential requirements of the European Construction
Products Regulation, including requirements made of safety, the environment and energy consumption.
An installation manual and user manual is supplied with the fire. An installer must be certified and a competent
professional in the field of woodburning appliances.
The installation manual provides the information you need to install the fire in such a way that it works properly
and safely.
This manual covers installation of the fire and the applicable instructions. You will also find the technical details of
the fire.
The figures are annexed at the back of this booklet.
You must fully and carefully read the installation manual before using it to install the fire. If you have any
questions or doubts always contact your supplier.
The user manual gives you the information you need to ensure that the appliance works properly and safely.
Carefully read the user manual before starting to use the fire.
The manuals include the following indications to show important information:
Ø
Action to take
Suggestions and advice
Tip!
These instructions are required to prevent possible problems during installation and/or use.
!Caution
These instructions are required to prevent fire, personal injury or other serious damage.
!CAUTION
After delivery you must give the user manual and this installation manual to the user.
The user must safely keep the user manual and installation manual.
24
I N S T A L LA T I ON M A N U A L