Power Supply Features:
• Input: AC 100-240V~50/60Hz 0.20 A
• Output: DC 5.0V – 750 mAh
Battery and Voltage:
• 1400 mAh; 3.7V
SAR value:
• 0,187 W/Kg (Head)
• 0,756 W/Kg (Body)
3. Insert the memory card and SIM card
Turn off the phone and remove the back cover and battery. Insert the
SIM card according to the mark on the device. Make sure that the
chip contact and the cut edge of the card are aligned in the correct
direction. Slide the card into the slot until it stops.
Tip: Insert an SD card to store more media.
Caution: Do not scratch or bend the SIM card. Be careful not to get
dust or water.
4. Switch the device on and off
Press and hold the Power button to turn on the power.
Press and hold the power button and select "Power off" from the
Options menu.
5