Changhong LED28D1500ST2 Mode D'emploi page 25

Menu Operation
• Default
Restore the system settings to help you to setup the TV.
• Software Upgrade
Update the TV with the latest software by USB.
• Version
Display the current software information.
Using USB mode
• To Access/Quit USB mode
1. Connect an USB device.
2. Press SOURCE button to display the main menu. Use the ▲/▼ to highlight USB,
and the ENTER button to access the USB mode.
3. You may also use the signal source selection menu to exit from the USB mode.
NOTE:
Special USB device may be not or well supported.
USB max. Load: DC5V 500mA
• The formats supported
The USB function can support the USB device with USB memory.
It can play Photo, Music, Movie or Text files.
Photo Format Support: JPEG, BMP, PNG.
Music Format Support: MP3, AAC, M4A.
Movie Format Support: AVI, DAT, MPEG -1 / MPEG-2 / MPEG-4, TS/TP.
Text Format Support: TXT.
NOTE:
• Special algorithm documents may not be or well be supported by the USB.
• The USB supports the format mentioned above, if the file format is not supported,
change it to the given format.
• Main Operating Interface
Use the ◄/► button to select Photo, Music, Movie or Text. Press ENTER button enter
into submenu.
Press the ▲/▼ button to select disk you want to watch, and then press ENTER button
to enter.
Press the CH+/CH- button to change page.
Press the red button to delete a photo/music/movie/text.
Press the green button to change display mode (in photo mode).
22