Publicité
Les langues disponibles
Les langues disponibles
Connection and Setup
Cable Installation
Please read the relevant content in "Warning and Safety instructions" carefully before
the
installation and use.
1. Take out the TV from the package and put it in a drafty and flat place.
NOTE:
When you plug or unplug the TV, computer or other equipment, you must make
sure that the power cable has been already shut down;
When unplugging the power cable or
(the insulated part), do not draw the body of the cable.
2. The RF output terminal can be connected with the RF input port of the TV.
3. The output AV terminal of DVD can be connected with the AV input port of the TV
through AV cable.
NOTE:
Component and AV can not be used at same time for they share of one audio
channel.
If COMPONENT (YPbPr) and AV works as mini terminal, and shared same audio,
please choose to use a one-to-three audio&video cable.
4. The output COMPONENT (YPbPr) terminal of DVD can be connected with the
COMPONENT (YPbPr) input port of the TV through AV cable.
5. Connect one end of the VGA cable with the VGA port on computer, connect the other
end
of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on
the
each end of VGA cable.
NOTE:
While connecting the 15-pin VGA, please do not insert the plug overexerted, for
fear
the pin might be broken.
6. Connect one end of the HDMI cable with HDMI output port; connect the other end of
the
HDMI cable with the HDMI port on the TV.
NOTE:
While connecting the HDMI, please aim at carefully, do not insert overexerted, for
the pin might be broken.
fear
7. Connect SCART socket input or output from an external device to these jacks.
8. Sending the TV's audio signal to external audio equipment via the Digital Audio
Output port.
9. Check and make sure that all AV cables are connected with the corresponding ports
correctly.
10. Connect the power cable with 100-240V~ power supply.
NOTE:
The range of power input for the TV is 100-240V~ 50/60Hz; do not connect the TV
power input port with the power cable out of the above range.
Please hold the insulated part of the plug when you are unplugging the power cable,
do
not touch directly the metallic part of the cable.
signal cable, please hold the plug
8
Publicité
