Changhong LED28D1500ST2 Mode D'emploi page 19

Menu Operation
– Operator: Press the
– Start: Press the ENTER button to start search channels.
DTV: Press the ENTER button to search the digital channels.
– Scan Mode: Press the ▲/▼ button to select scan mode: Blind Scan or Quick Scan.
Network ID and Frequency (KHz) can be adjusted when the Scan Mode is set to
Quick Scan.
– Network ID: Press the ◄/► button to select Network ID: Auto or enter digital
numbers.
– Frequency (KHz): Press the ◄/► button to select Frequency (KHz): Auto or enter
digital numbers.
– Operator: Press the
– Start: Press the ENTER button to start search channels.
ATV: Press the ENTER button to search the analog channels.
When TV signals is Satellite.
DTV: Press the ENTER button to search the digital channels.
– Scan Mode: Press the ▲/▼ button to select scan mode: Default, Network Search or
Blind Scan.
– Satellite: Press the ▲/▼ button to select satellite names.
– Service Type: Press the ▲/▼ button to select service type.: All Services or Free
Service.
– Channel Type: Press the ▲/▼ button to select channel type: All or TV only.
– Start: Press the ENTER button to start search channels.
• DTV Manual Scan
Press the ENTER button to access the submenu.
When TV signals is Air.
Channel: Press the ▲/▼ button to select the channel number.
Frequency (KHz): Display the frequency of current TV signal, or enter a user-defined
frequency.
BandWidth (MHz): Press the ▲/▼ button to select the bandwidth.
Start: Press the ENTER button to start search channels.
When TV signals is Cable.
Frequency (KHz): Display the frequency of current TV signal.
SymbolRate (KS/s): Press the ◄/► button to select SymbolRate: Auto or enter digital
numbers.
Modulation(QAM): Press the ▲/▼ button to select Modulation: Auto, 16QAM, 32QAM,
64QAM, 128QAM or 256QAM.
Start: Press the ENTER button to start search channels.
• ATV Manual Scan
Press the ENTER button to access the submenu.
Current Channel: Press the ▲/▼ button to select current channel.
Frequency: Display the frequency of current TV signal.
Scan: Press the ENTER button to enter scan, and then press ◄/► button to select
analog scan.
▲/▼ button to select the operator.
button to select the operator.
▲/▼
16